# Laser Engraver Accessories: Safety, Fume Extraction, Rotaries & Materials

> 27 laser engraver accessories: wavelength-rated safety glasses, smoke purifiers and duct fans, air assist, rotaries, honeycomb beds and laser-ready materials.

- Source: https://laserengraversguide.com/accessories/
- Markdown version: https://laserengraversguide.com/accessories.md

---

- [Home](https://laserengraversguide.com/)
- Accessories

# Laser engraver accessories & materials
Safety gear, fume extraction, air assist, rotaries and materials for the lasers we review, all sold on Amazon. Pick your laser brand to filter.

## Safety gear
[Guide →](https://laserengraversguide.com/posts/laser-engraver-safety-guide/)
Wavelength-rated glasses and fire protection. Buy these before the first cut, not after.

- Safety**Amerex B417T 2.5 lb ABC fire extinguisher with bracket**Universal fitLasers cut by burning; a small ABC extinguisher mounted beside the machine is the cheapest fire insurance you can buy. Dry-chemical powder can ruin a laser's optics and electronics; LightBurn recommends a CO2 extinguisher for the machine itself.[Check price](https://www.amazon.com/dp/B084P5PPNC?tag=laserengraversguide.com-20)
- Safety**Amerex 322 5 lb carbon dioxide (CO2) fire extinguisher**Universal fitClass B:C CO2 leaves no powder residue, so it puts out a fire in the machine without destroying the optics. Pricier than ABC; not rated for Class A (wood/paper) fires on its own, so keep a fire blanket too.[Check price](https://www.amazon.com/dp/B00F5CJHFW?tag=laserengraversguide.com-20)
- Safety**CARLANY 190–490 nm OD6+ laser safety glasses**Universal fitBlue-diode protection for anyone near an open-frame laser, or when you lift the lid or override an interlock on an enclosed one. Covers 445–455 nm blue diodes only; does not protect against 1064 nm IR/fiber or 10.6 µm CO2. Match the OD rating to your laser's wavelength.[Check price](https://www.amazon.com/dp/B08R4PMCHR?tag=laserengraversguide.com-20)
- Safety**Cloudray 1064 nm laser safety goggles**Compatible, third-partyThe invisible 1064 nm beam of fiber and IR lasers needs its own eyewear; blue-diode glasses won't stop it. Fits: [ComMarker B4 20W](https://laserengraversguide.com/laser-engravers/commarker-b4-20w/), [xTool F2](https://laserengraversguide.com/laser-engravers/xtool-f2/), [xTool F1 Ultra](https://laserengraversguide.com/laser-engravers/xtool-f1-ultra/), [xTool F2 Ultra](https://laserengraversguide.com/laser-engravers/xtool-f2-ultra/), [LaserPecker LP5](https://laserengraversguide.com/laser-engravers/laserpecker-lp5/), [Falcon A1C 10W](https://laserengraversguide.com/laser-engravers/creality-falcon-a1c-10w/), [Falcon A1 Pro](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-pro-20w/). For 1064 nm sources only. Dual-laser machines need protection for both wavelengths; check the OD rating on the listing.[Check price](https://www.amazon.com/dp/B078J3JS39?tag=laserengraversguide.com-20)
- Safety**Prepared Hero emergency fire blanket, 39 × 39 in (2-pack)**Universal fitSmothers a flare-up on the bed without coating the machine's optics in extinguisher powder.[Check price](https://www.amazon.com/dp/B08TYT543Y?tag=laserengraversguide.com-20)

## Fume extraction & enclosures
[Guide →](https://laserengraversguide.com/posts/laser-engraver-ventilation-guide/)
Every material makes smoke. Vent it outdoors with a duct fan, filter it with a purifier, or contain an open-frame machine in an enclosure.

- Fumes & enclosure**LaserPecker LP5 safety enclosure with alignment camera**Official LaserPeckerTurns the LP5 into a Class 1 setup with a camera and smoke control, which you need for indoor or in-store use. Fits: [LaserPecker LP5](https://laserengraversguide.com/laser-engravers/laserpecker-lp5/). The LP5 + Enclosure Amazon bundle was cheaper than buying both separately on Oct 29, 2026.[Check price](https://www.amazon.com/dp/B0FFGDG3RC?tag=laserengraversguide.com-20)
- Fumes & enclosure**xTool Desktop Smoke Purifier (3-layer filtration)**Official xToolLets the M2 or F-series run indoors without a window vent for light engraving work. Fits: [xTool M2 10W](https://laserengraversguide.com/laser-engravers/xtool-m2-10w/), [xTool F2](https://laserengraversguide.com/laser-engravers/xtool-f2/), [xTool F1 Ultra](https://laserengraversguide.com/laser-engravers/xtool-f1-ultra/). xTool sizes it for low-smoke machines; for heavy cutting it recommends the SafetyPro AP2.[Check price](https://www.amazon.com/dp/B0CFFN7FR4?tag=laserengraversguide.com-20)
- Fumes & enclosure**xTool SafetyPro AP2 smoke purifier**Official xToolThe purifier xTool pairs with its CO2 and high-power machines when venting outdoors isn't possible. Fits: [xTool P2S](https://laserengraversguide.com/laser-engravers/xtool-p2s/), [xTool S1 40W](https://laserengraversguide.com/laser-engravers/xtool-s1-40w/), [xTool F2 Ultra](https://laserengraversguide.com/laser-engravers/xtool-f2-ultra/), [xTool M2 10W](https://laserengraversguide.com/laser-engravers/xtool-m2-10w/). xTool positions the larger AP2 Max for the P3.[Check price](https://www.amazon.com/dp/B0DHCJQS1J?tag=laserengraversguide.com-20)
- Fumes & enclosure**AC Infinity Cloudline S4 4-inch inline duct fan with speed controller**Universal fitBoosts a laser's built-in exhaust over long duct runs so smoke actually leaves the room. Check your machine's exhaust port diameter; adapters may be needed.[Check price](https://www.amazon.com/dp/B07JB292JC?tag=laserengraversguide.com-20)
- Fumes & enclosure**Creality laser engraver enclosure, 700 × 720 × 400 mm, with exhaust fan**Compatible, third-partyA fire-resistant tent that contains smoke and stray blue light from open-frame diodes. Fits: [A20 Pro V2](https://laserengraversguide.com/laser-engravers/atomstack-a20-pro-v2/), [Ray5 40W](https://laserengraversguide.com/laser-engravers/longer-ray5-40w/). Measure your frame first: the Ray5 40W and A20 Pro V2 footprints are close to the 700 × 720 mm limit. An enclosure doesn't make a Class 4 laser Class 1; keep goggles on when it's open.[Check price](https://www.amazon.com/dp/B0C3GLYC3Y?tag=laserengraversguide.com-20)
- Fumes & enclosure**VIVOSUN 4-inch aluminum ducting, 25 ft with clamps**Universal fitReplaces short stock hoses so you can reach a window or wall vent; foil duct tolerates hot exhaust better than vinyl.[Check price](https://www.amazon.com/dp/B01EUURUVM?tag=laserengraversguide.com-20)

## Air assist

A steady stream of air at the cut point: cleaner, deeper cuts, less charring and fewer flare-ups.

- Air assist**Atomstack F80 air assist pump, 10–60 L/min**Official AtomstackThe base A20 Pro V2 ships without air assist; this is what gives clean, deep cuts with less charring. Fits: [A20 Pro V2](https://laserengraversguide.com/laser-engravers/atomstack-a20-pro-v2/).[Check price](https://www.amazon.com/dp/B0F5HK7KDR?tag=laserengraversguide.com-20)

## Rotaries, beds & upgrades
[Guide →](https://laserengraversguide.com/posts/laser-engraver-accessories-worth-buying/)
Rotaries for tumblers and rings, honeycomb beds and risers for clean cuts and taller items.

- Rotary**Creality Rotary Roller Pro 3-in-1 kit**Official CrealityJaw-chuck and roller rotary for engraving cups, glasses and rings on Falcon lasers. Fits: [Falcon A1 10W](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-10w/), [Falcon A1 Pro](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-pro-20w/). Sold for 'Falcon and other engraving machines'; Creality also bundles it with the A1 and A1 Pro. Confirm riser height for your model.[Check price](https://www.amazon.com/dp/B0DHD27N4F?tag=laserengraversguide.com-20)
- Bed & riser**Creality honeycomb laser bed for Falcon A1 / A1 Pro**Official CrealitySized for the A1 enclosure (the 500 × 500 mm Creality bed doesn't fit) for cleaner cuts and a protected base plate. Fits: [Falcon A1 10W](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-10w/), [Falcon A1 Pro](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-pro-20w/).[Check price](https://www.amazon.com/dp/B0F4QQGHDM?tag=laserengraversguide.com-20)
- Upgrade**Creality Falcon A1C 1.2W IR laser module**Official CrealityTool-free swap that marks bare stainless, jewelry and dark stone the blue diode can't. Fits: [Falcon A1C 10W](https://laserengraversguide.com/laser-engravers/creality-falcon-a1c-10w/).[Check price](https://www.amazon.com/dp/B0H5R6815J?tag=laserengraversguide.com-20)
- Rotary**xTool RA2 Pro rotary attachment**Official xTool4-in-1 rotary for tumblers, glasses, rings and spheres on xTool's enclosed and galvo machines. Fits: [xTool S1 40W](https://laserengraversguide.com/laser-engravers/xtool-s1-40w/), [xTool F1 Ultra](https://laserengraversguide.com/laser-engravers/xtool-f1-ultra/), [xTool P2S](https://laserengraversguide.com/laser-engravers/xtool-p2s/). xTool says it must be used with a riser on enclosed machines; check whether your S1 bundle already includes it.[Check price](https://www.amazon.com/dp/B0CJ2BXQ7N?tag=laserengraversguide.com-20)
- Rotary**xTool RA3 MagSwap smart rotary**Official xToolxTool's newer rotary with LiDAR mapping and magnetic mode swaps, built for the P3 and F-series. Fits: [xTool P3](https://laserengraversguide.com/laser-engravers/xtool-p3/), [xTool F2 Ultra](https://laserengraversguide.com/laser-engravers/xtool-f2-ultra/), [xTool F1 Ultra](https://laserengraversguide.com/laser-engravers/xtool-f1-ultra/), [xTool F2](https://laserengraversguide.com/laser-engravers/xtool-f2/).[Check price](https://www.amazon.com/dp/B0FPLTWJ38?tag=laserengraversguide.com-20)
- Bed & riser**xTool P2 Honeycomb Working Panel 2.0**Official xToolStops small cut pieces falling through the slats and cuts backside flashback on the P2S. Fits: [xTool P2S](https://laserengraversguide.com/laser-engravers/xtool-p2s/).[Check price](https://www.amazon.com/dp/B0D472GG2D?tag=laserengraversguide.com-20)
- Bed & riser**xTool S1 Riser Base**Official xToolRaises the S1's clearance from 42 mm to 125 mm for rotary work and tall objects while staying Class 1. Fits: [xTool S1 40W](https://laserengraversguide.com/laser-engravers/xtool-s1-40w/).[Check price](https://www.amazon.com/dp/B0CPKYY7GQ?tag=laserengraversguide.com-20)
- Upgrade**xTool Slide Extension for F2 / F1**Official xToolStretches the F2's 115 × 115 mm field to 115 × 400 mm for batches of coasters, cards and phone cases. Fits: [xTool F2](https://laserengraversguide.com/laser-engravers/xtool-f2/).[Check price](https://www.amazon.com/dp/B0CHMQ96N3?tag=laserengraversguide.com-20)
- Rotary**Ortur laser rotary roller (Y-axis)**Compatible, third-partyAn inexpensive, widely used roller rotary for tumblers and cans on open-frame GRBL diodes. Fits: [A20 Pro V2](https://laserengraversguide.com/laser-engravers/atomstack-a20-pro-v2/), [Ray5 40W](https://laserengraversguide.com/laser-engravers/longer-ray5-40w/). Plugs into the Y-axis motor port; confirm your controller's connector and set rotary mode in LightBurn.[Check price](https://www.amazon.com/dp/B08CBV2B6N?tag=laserengraversguide.com-20)

## Laser-ready materials
[Guide →](https://laserengraversguide.com/tools/material-checker/)
Laser-grade plywood, cast acrylic, slate, leatherette and blanks that behave predictably, so your settings carry over job to job.

- Materials**3 mm basswood plywood sheets, 12 × 12 in (12-pack)**Universal fitThe default test and project stock for every laser here; 12 × 12 in fits all but the smallest beds. Cut down for the 150 mm A1C or galvo machines.[Check price](https://www.amazon.com/dp/B0DRG9L2TD?tag=laserengraversguide.com-20)
- Materials**Clear cast acrylic sheets, 12 × 12 × 1/8 in (10-pack)**Compatible, third-partyCast acrylic cuts with flame-polished edges on a CO2 laser; it's the material that justifies buying one. Fits: [xTool P2S](https://laserengraversguide.com/laser-engravers/xtool-p2s/), [xTool P3](https://laserengraversguide.com/laser-engravers/xtool-p3/), [OMTech K40+](https://laserengraversguide.com/laser-engravers/omtech-k40-plus-45w/). CO2 only: blue diodes pass straight through clear acrylic.[Check price](https://www.amazon.com/dp/B0BHSCPS3K?tag=laserengraversguide.com-20)
- Materials**Laserable leatherette hat patches with adhesive, 3 × 2 in (50-pack)**Universal fitCheap, fast-selling patch blanks that engrave cleanly with diode and CO2 lasers. Not for fiber-only lasers such as the ComMarker B4.[Check price](https://www.amazon.com/dp/B0BFDQZKPZ?tag=laserengraversguide.com-20)
- Materials**Black anodized aluminum business cards, 0.8 mm (15-pack)**Universal fitAnodized aluminum engraves to a crisp white with blue diodes, CO2, IR and fiber, ideal for test pieces and premium cards.[Check price](https://www.amazon.com/dp/B08JM4YJ13?tag=laserengraversguide.com-20)
- Materials**VIBRATITE 4-inch square black slate coasters (60-pack)**Universal fitBest-selling laser blank: slate engraves light grey on black with any diode, CO2 or IR source.[Check price](https://www.amazon.com/dp/B0CDWL9YPH?tag=laserengraversguide.com-20)
- Materials**YOUKE OLA powder-coated 20 oz tumblers for laser engraving (16-pack)**Universal fitPowder coat ablates to bright steel with diode, CO2 or fiber lasers, which makes these the classic rotary product. Needs a rotary attachment on flatbed machines.[Check price](https://www.amazon.com/dp/B0DPQ3XBJZ?tag=laserengraversguide.com-20)

Compatibility checked October 2026. Confirm your exact model on the listing before buying.

## What to buy first
Three things come before any upgrade: eye protection rated for your laser's wavelength (unless the machine is a fully enclosed Class 1 unit and you never run it with the lid open), a way to get smoke out of the room, and a fire extinguisher within reach. Many open-frame diode lasers ship with a pair of glasses; check that they're rated for the wavelength and optical density the maker recommends rather than assuming.

## Ventilation: duct out or filter
Venting outdoors through a window kit and an inline duct fan is the cheapest and most effective option when you have a window. A smoke purifier with HEPA and activated carbon filters lets you run indoors where you can't vent, but the filters are a running cost and carbon saturates quickly with heavy wood cutting. Enclosed machines have an exhaust port; open frames need an enclosure to capture smoke at all. Our [ventilation guide](https://laserengraversguide.com/posts/laser-engraver-ventilation-guide/) covers duct sizing and fan airflow.

## Air assist and a honeycomb bed
Air assist blows smoke and debris away from the cut, which means cleaner edges, deeper cuts per pass and fewer flare-ups. Many current machines include it; on older or budget open frames it's the most worthwhile upgrade. A honeycomb bed lifts the work so the beam exits cleanly and back-side scorching drops, though it collects residue and needs cleaning.

## Rotaries are for round things
Tumblers, mugs, rings and bottles need a rotary that spins the item under the beam. Buy the one made for your machine where possible: the software, mounting and connection are matched. Roller rotaries suit tumblers and bottles; chuck rotaries hold tapered or uneven items and rings. Galvo machines and enclosed boxes sometimes need a riser to fit a rotary underneath.

## Materials that behave
Settings only transfer between jobs if the material is consistent. Laser-grade basswood plywood uses a glue that cuts cleanly; cast acrylic engraves white and frosty where extruded acrylic doesn't. Before you buy anything new, check it in the [material checker](https://laserengraversguide.com/tools/material-checker/), and never laser PVC or vinyl. Still choosing the laser itself? Start with the [comparison chart](https://laserengraversguide.com/laser-engravers/).