# Best Laser Cutter for Wood 2026: 6 Picks by Cut Depth

> The best laser cutters for wood in 2026: the xTool P2S CO2, the Class 1 xTool S1 40W, the Longer Ray5 40W on a budget and more, with honest cut-depth claims.

- Source: https://laserengraversguide.com/posts/best-laser-cutter-for-wood/
- Markdown version: https://laserengraversguide.com/posts/best-laser-cutter-for-wood.md
- Last updated: 2026-10-30

---

- [Home](https://laserengraversguide.com/)
- [Guides](https://laserengraversguide.com/guides/)
- The Best Laser Cutter for Wood in 2026: CO2 and High-Power Diode Picks

 Wood
# The Best Laser Cutter for Wood in 2026: CO2 and High-Power Diode Picks
  Updated October 30, 2026 By [Laser Engravers Guide Editorial Team](https://laserengraversguide.com/about/) [How we research](https://laserengraversguide.com/how-we-research/)

Prices are approximate and change often, so check the current price before you buy.

## Key takeaways

- The **xTool P2S** (about $2,919) is our pick for cutting wood: a 55 W CO2 that xTool rates at 18 mm basswood in one pass, with a 600 × 305 mm bed and passthrough.
- Need Class 1 for a shared room? The **xTool S1 40W** is the strongest enclosed diode, rated by xTool at 18 mm cherry in one pass.
- On a budget, the **Longer Ray5 40W** (about $648) promises 20 mm basswood, but it's an open-frame Class 4 machine and that figure hasn't been independently tested.
- Every cut depth here is a maker claim. Check whether it's one pass or several, and buy laser-grade plywood: glue voids in cheap sheets cause uncut spots.

## Our top picks

- 1![xTool P2S 55W Desktop CO2 Laser](https://laserengraversguide.com/_astro/xtool-p2s.Pf-kujUy_ZUoQPB.webp)Best for cutting wood: 55 W CO2, 18 mm basswood in one pass (maker claim), 600 × 305 mm bed, about $2,919[xTool P2S 55W Desktop CO2 Laser](https://laserengraversguide.com/laser-engravers/xtool-p2s/)55 W co2 · Enclosed · 600 × 305 mm8.7**$$$**$PremiumPrice tier: Premium[Check price on Amazon](https://www.amazon.com/dp/B0DDXQYH36?tag=laserengraversguide.com-20)
- 2![xTool S1 40W Enclosed Diode Laser](https://laserengraversguide.com/_astro/xtool-s1-40w.BYUVEG1P_uSsS4.webp)Best Class 1 wood cutter: 40 W diode, 18 mm cherry in one pass (maker claim), about $1,819[xTool S1 40W Enclosed Diode Laser](https://laserengraversguide.com/laser-engravers/xtool-s1-40w/)40 W diode · Enclosed · 498 × 319 mm8.5**$$$**$PremiumPrice tier: Premium[Check price](https://www.amazon.com/dp/B0CQ84BDTX?tag=laserengraversguide.com-20)
- 3![Longer Ray5 40W](https://laserengraversguide.com/_astro/longer-ray5-40w.78cZa2lP_Zlqm6p.webp)Budget cutting power: 40 W open-frame diode with air assist, about $648[Longer Ray5 40W](https://laserengraversguide.com/laser-engravers/longer-ray5-40w/)40 W diode · Open frame · 385 × 385 mm7.5**$$**$$Mid-rangePrice tier: Mid-range[Check price](https://www.amazon.com/dp/B0FNRFK21L?tag=laserengraversguide.com-20)
- 4![Creality Falcon A1 Pro 20W](https://laserengraversguide.com/_astro/creality-falcon-a1-pro-20w.uHe_1xlH_oxTpc.webp)Best enclosed under $1,100: 20 W diode with air assist and autofocus, about $1,099[Creality Falcon A1 Pro 20W](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-pro-20w/)20 W diode · Enclosed · 358 × 268 mm8.2**$$**$$Mid-rangePrice tier: Mid-range[Check price](https://www.amazon.com/dp/B0FDFFN85C?tag=laserengraversguide.com-20)
- 5![OMTech K40+ 45W Desktop CO2 Laser](https://laserengraversguide.com/_astro/omtech-k40-plus-45w.BEOGj9sl_2oxI3U.webp)Cheapest CO2: small bed and conflicting cut figures, about $760–800[OMTech K40+ 45W Desktop CO2 Laser](https://laserengraversguide.com/laser-engravers/omtech-k40-plus-45w/)45 W co2 · Enclosed · 300 × 200 mm7.0**$$**$$Mid-rangePrice tier: Mid-range[Check price](https://www.amazon.com/dp/B0DFM5L5MD?tag=laserengraversguide.com-20)
- 6![xTool P3 80W Flagship CO2 Laser](https://laserengraversguide.com/_astro/xtool-p3.DDJ_t47w_27DoVi.webp)Production wood cutting: 80 W Class 1 CO2 with a 915 × 458 mm bed, about $6,300–7,900[xTool P3 80W Flagship CO2 Laser](https://laserengraversguide.com/laser-engravers/xtool-p3/)80 W co2 · Enclosed · 915 × 458 mm8.6**$$$$**ProPrice tier: Pro[Check price](https://www.amazon.com/dp/B0FMJLMNF8?tag=laserengraversguide.com-20)

### On this page 11 sections

- [The shortlist](#the-shortlist)
- [CO2 or diode for wood?](#co2-or-diode-for-wood)
- [1. xTool P2S: Best laser cutter for wood](#1-xtool-p2s-best-laser-cutter-for-wood)
- [2. xTool S1 40W: Best Class 1 wood cutter](#2-xtool-s1-40w-best-class-1-wood-cutter)
- [3. Longer Ray5 40W: Budget cutting power](#3-longer-ray5-40w-budget-cutting-power)
- [4. Creality Falcon A1 Pro 20W: Best enclosed wood cutter under $1,100](#4-creality-falcon-a1-pro-20w-best-enclosed-wood-cutter-under-1100)
- [5. OMTech K40+: Cheapest CO2](#5-omtech-k40-cheapest-co2)
- [6. xTool P3: Production wood cutting](#6-xtool-p3-production-wood-cutting)
- [Getting clean wood cuts](#getting-clean-wood-cuts)
- [Which wood laser should you buy?](#which-wood-laser-should-you-buy)
- [FAQ](#faq)

## Before you choose

- [xTool S1 40W vs xTool P2S 55W: Enclosed Diode or Desktop CO2?](https://laserengraversguide.com/posts/xtool-s1-vs-xtool-p2s/)
- [Diode vs CO2 vs Fiber Laser: Which Type Do You Actually Need?](https://laserengraversguide.com/posts/diode-vs-co2-vs-fiber-laser/)
- [What Materials Can a Laser Cut or Engrave? Diode vs. CO2 vs. Fiber](https://laserengraversguide.com/posts/what-materials-can-a-laser-cut/)

Engraving wood is easy for any laser. Cutting it cleanly, especially past 6 mm, is where machines separate. Two things decide it: the laser type (CO2 cuts faster and cleaner than a blue diode of similar price) and real optical power, which listing titles often inflate. This guide ranks the best lasers for cutting wood, from a $650 open frame to an 80 W production CO2.

Every cut depth below is the maker’s own claim, not a test we ran. We note whether each figure is single-pass and flag where makers contradict themselves. Our picks draw on manufacturer specs, Amazon listings and independent reviews; we haven’t used these machines ourselves. Prices are from Amazon on October 29, 2026, so check today’s price.

## The shortlist

| Laser | Type | Maker cut claim (wood) | Bed | Class | Price |
| --- | --- | --- | --- | --- | --- |
| [xTool P2S](https://laserengraversguide.com/laser-engravers/xtool-p2s/) | 55 W CO2 | 18 mm basswood, one pass | 600 × 305 mm | Class 4 | ~$2,919 |
| [xTool S1 40W](https://laserengraversguide.com/laser-engravers/xtool-s1-40w/) | 40 W diode | 18 mm cherry, one pass | 498 × 319 mm | Class 1 | ~$1,819 |
| [Longer Ray5 40W](https://laserengraversguide.com/laser-engravers/longer-ray5-40w/) | 40 W diode, open frame | 20 mm basswood, one pass (untested) | 385 × 385 mm | Class 4 | ~$648 |
| [Falcon A1 Pro](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-pro-20w/) | 20 W diode | 10 mm basswood, passes not stated | 358 × 268 mm | Class 1 | ~$1,099 |
| [OMTech K40+](https://laserengraversguide.com/laser-engravers/omtech-k40-plus-45w/) | CO2 (“45W” tube rating) | 8 mm (listing) vs 3 mm (help center) | 300 × 200 mm | Not stated | ~$760–800 |
| [xTool P3](https://laserengraversguide.com/laser-engravers/xtool-p3/) | 80 W CO2 | 20 mm basswood, one pass | 915 × 458 mm | Class 1 | ~$6,300–7,900 |

Bed size matters as much as depth for wood projects like signs, boxes and puzzles. The chart compares every machine we track.

  Working area (square inches) The biggest flat piece each machine can engrave in one job, as rated by the maker.

     Diode
     CO2
     Fiber / IR / UV / dual

[xTool P3

       650](https://laserengraversguide.com/laser-engravers/xtool-p3/)[xTool P2S

       284](https://laserengraversguide.com/laser-engravers/xtool-p2s/)[xTool S1 40W

       246](https://laserengraversguide.com/laser-engravers/xtool-s1-40w/)[Ray5 40W

       230](https://laserengraversguide.com/laser-engravers/longer-ray5-40w/)[A20 Pro V2

       226](https://laserengraversguide.com/laser-engravers/atomstack-a20-pro-v2/)[xTool M2 10W

       211](https://laserengraversguide.com/laser-engravers/xtool-m2-10w/)[Falcon A1 10W

       180](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-10w/)[Falcon A1 Pro

       149](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-pro-20w/)[Glowforge Aura

       144](https://laserengraversguide.com/laser-engravers/glowforge-aura/)[OMTech K40+

       93](https://laserengraversguide.com/laser-engravers/omtech-k40-plus-45w/)[xTool F1 Ultra

       75](https://laserengraversguide.com/laser-engravers/xtool-f1-ultra/)[xTool F2 Ultra

       75](https://laserengraversguide.com/laser-engravers/xtool-f2-ultra/)[ComMarker B4 20W

       62](https://laserengraversguide.com/laser-engravers/commarker-b4-20w/)[Falcon A1C 10W

       35](https://laserengraversguide.com/laser-engravers/creality-falcon-a1c-10w/)[LaserPecker LP5

       30](https://laserengraversguide.com/laser-engravers/laserpecker-lp5/)[xTool F2

       20](https://laserengraversguide.com/laser-engravers/xtool-f2/)
   0200400600

  Galvo machines have small fields but are many times faster. Some open frames and pass-through enclosures take longer pieces; tap a bar for notes.

## CO2 or diode for wood?

Both cut wood. They differ in speed, size and what else they can do.

CO2 (the P2S, K40+ and P3) is the traditional cutting laser. At 55–80 W, it cuts thick stock in fewer passes and also cuts every color of acrylic, including clear. The costs are size and upkeep: the P2S weighs 99 lb, CO2 tubes slowly lose power, the budget K40+ needs water cooling and mirror alignment, and the P2S is rated Class 4, so it needs a vented room you control.

High-power blue diodes (the S1 40W, Ray5 40W and A1 Pro) are smaller and lighter, need no water cooling, and in the S1 and A1 Pro come inside a Class 1 enclosure. They cut thick wood more slowly than a 55 W CO2 and can’t cut clear acrylic. Dense hardwoods are noticeably slower than basswood.

If you mostly cut 3–6 mm plywood for ornaments, puzzles and boxes, a 20–40 W diode does the job in a friendlier package. If you cut thick stock daily, sell acrylic products or need speed for orders, CO2 earns its size. Our [diode vs CO2 vs fiber](https://laserengraversguide.com/posts/diode-vs-co2-vs-fiber-laser/) comparison goes deeper.

## 1. xTool P2S: Best laser cutter for wood

The [xTool P2S](https://laserengraversguide.com/laser-engravers/xtool-p2s/) is the wood cutter we’d buy if you can vent it outdoors. xTool rates its 55 W CO2 tube at 18 mm basswood in one pass, and [The Gadgeteer](https://the-gadgeteer.com/2025/01/05/xtool-p2s-55w-desktop-co2-laser-cutter-review-a-laser-cutting-and-engraving-dream-machine) found its wood cuts clean with very little to no charring. The 600 × 305 mm bed is the widest under $6,000 here, and the passthrough takes boards up to 3 m long. Built-in air assist and a strong exhaust handle smoke, while dual cameras and LiDAR autofocus make lining up cuts on irregular offcuts easy.

It also cuts every color of acrylic, including clear, which no diode can. The downsides: it weighs 99 lb, it’s rated Class 4, and the glass tube slowly loses power (xTool quotes about 70% at 6,000–8,000 hours). Plan on venting outside or xTool’s AP2 purifier (about $919). xTool’s [Honeycomb Working Panel 2.0](https://www.amazon.com/dp/B0D472GG2D?tag=laserengraversguide.com-20) (about $139) stops small parts dropping through and cuts backside flashback. [Check the P2S price](https://www.amazon.com/dp/B0DDXQYH36?tag=laserengraversguide.com-20).

## 2. xTool S1 40W: Best Class 1 wood cutter

The [xTool S1 40W](https://laserengraversguide.com/laser-engravers/xtool-s1-40w/) is the answer when the cutter has to live in a home office, classroom or shared room. Its 40 W diode sits in a Class 1 enclosure, and xTool claims 18 mm cherry in a single pass. That’s a hardwood figure; xTool doesn’t publish a separate basswood maximum. The 498 × 319 mm bed is the largest of the enclosed diodes, and a conveyor passthrough handles stock up to 3 m long. [Maker Hacks](https://www.makerhacks.com/xtool-s1-review) notes it measures material height with a touch probe and supports curved-surface engraving.

For clean cuts, budget for xTool’s air assist, which is an add-on. There’s no camera, so positioning uses the laser head. Diode cutting of thick stock is slower than a 55 W CO2. Availability is the main risk: Amazon’s only listing, at about $1,819, is a “Rotary Bundle,” so confirm the contents, and xTool’s Canadian store lists the S1 under clearance. [Check the S1 price](https://www.amazon.com/dp/B0CQ84BDTX?tag=laserengraversguide.com-20), or read [xTool S1 vs xTool P2S](https://laserengraversguide.com/posts/xtool-s1-vs-xtool-p2s/).

## 3. Longer Ray5 40W: Budget cutting power

On paper, the [Longer Ray5 40W](https://laserengraversguide.com/laser-engravers/longer-ray5-40w/) is the most wood-cutting power per dollar we track: a 40 W eight-beam diode module, included air assist and a 385 mm-square bed for about $648. Longer claims 20 mm basswood in one pass. It runs offline from a 3.5-in touchscreen and TF card or over Wi-Fi and USB with LightBurn, and it has flame and motion sensors, temperature protection and an emergency stop.

It’s an open-frame Class 4 laser, so everyone in the room needs 445 nm-rated glasses, and it belongs in a garage or workshop with an enclosure and ventilation. Focus is manual and there’s no camera. Most important, we found no major-outlet test of the 40 W version, so treat the 20 mm figure as a claim. Amazon groups Ray5 versions under work-area labels; the 40 W is the “385x385mm” option, so confirm the wattage before you order. [Check the Ray5 40W price](https://www.amazon.com/dp/B0FNRFK21L?tag=laserengraversguide.com-20).

The cheaper [Atomstack A20 Pro V2](https://laserengraversguide.com/laser-engravers/atomstack-a20-pro-v2/) (about $390) is a 20 W open frame with a claimed 12 mm one-pass cut. Air assist is extra, and it also lacks an independent review.

## 4. Creality Falcon A1 Pro 20W: Best enclosed wood cutter under $1,100

The [Falcon A1 Pro](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-pro-20w/) is the most affordable Class 1 machine we’d buy for regular wood cutting. Its 20 W diode has built-in air assist, and Creality quotes 10 mm basswood “with fewer passes” without saying how many, so plan on multiple passes for thick stock. Camera autofocus, a touchscreen, Wi-Fi and LightBurn support make it easy to run. The 358 × 268 mm bed is the limit for larger signs; the cheaper 10 W [Falcon A1](https://laserengraversguide.com/laser-engravers/creality-falcon-a1-10w/) has a bigger bed but cuts only about 6 mm. About $1,099. [Check the A1 Pro price](https://www.amazon.com/dp/B0FDFFN85C?tag=laserengraversguide.com-20).

If you prefer xTool, the [M2](https://laserengraversguide.com/laser-engravers/xtool-m2-10w/) with its 20 W head (about $899, rated at 10 mm basswood in one pass) or 40 W head (about $1,199, 15 mm in one pass) is the Class 1 alternative.

## 5. OMTech K40+: Cheapest CO2

The [OMTech K40+](https://laserengraversguide.com/laser-engravers/omtech-k40-plus-45w/) is the budget door into CO2 at about $760–800, with built-in air assist, an exhaust fan, a door interlock and LightBurn support. GoLaserGo found it solid and LightBurn-friendly. For wood, its limits are real: a small 300 × 200 mm bed, water cooling via a pump in a bucket, mirror alignment and manual focus. OMTech’s own figures conflict, too. The 45 W listing claims 8 mm wood, while its help center says 3 mm. The FAQ may predate the 45 W upgrade, but we wouldn’t count on thick cuts. The “45W” is a tube rating, not a measured output. [Check the K40+ price](https://www.amazon.com/dp/B0DFM5L5MD?tag=laserengraversguide.com-20).

## 6. xTool P3: Production wood cutting

For a shop cutting sheet goods all day, the [xTool P3](https://laserengraversguide.com/laser-engravers/xtool-p3/) is the upgrade: an 80 W CO2 rated at 20 mm basswood in one pass, a 915 × 458 mm (36 × 18 in) bed, speeds up to 1,200 mm/s, a built-in chiller and Class 1 certification with fire suppression. [Tom’s Hardware](https://www.tomshardware.com/maker-stem/xtool-p3-review) found it fast and accurate on wood and acrylic, though the head bumped work a couple of times in its testing. It weighs 231 lb, runs xTool Studio only, and costs about $6,300–7,900. [Check the P3 price](https://www.amazon.com/dp/B0FMJLMNF8?tag=laserengraversguide.com-20).

## Getting clean wood cuts

The machine is half the result. The rest is material and setup:

- **Buy laser-grade plywood.** Glue layers in cheap plywood cause uncut spots. [3 mm basswood plywood](https://www.amazon.com/dp/B0DRG9L2TD?tag=laserengraversguide.com-20) (about $25 for 12 sheets) is the standard test stock.

- **Use air assist.** It clears smoke from the cut, reduces charring and helps diodes cut deeper. Every pick here has it built in or available.

- **Respect hardwood density.** Walnut, maple and cherry engrave beautifully but cut slowly on diodes. Keep thickness modest.

- **Vent MDF well.** It cuts cleanly, but the resin binder makes heavy, strong-smelling smoke.

- **Watch every cut.** Wood burns. Keep an extinguisher and fire blanket nearby, and never leave a job running.

Check any specific material in the material checker: [plywood](https://laserengraversguide.com/tools/material-checker/?material=plywood), [hardwood](https://laserengraversguide.com/tools/material-checker/?material=hardwood) or [MDF](https://laserengraversguide.com/tools/material-checker/?material=mdf).

## Which wood laser should you buy?

- **Thick cuts, big bed, can vent outdoors:** xTool P2S.

- **Thick cuts in a shared room:** xTool S1 40W.

- **Most power for the money, dedicated workshop:** Longer Ray5 40W.

- **Enclosed, mostly 3–6 mm plywood, under $1,100:** Falcon A1 Pro.

- **Cheapest CO2 and you like tinkering:** OMTech K40+.

- **Production volume:** xTool P3.

Not sure CO2 is worth it? [Diode vs CO2 vs fiber](https://laserengraversguide.com/posts/diode-vs-co2-vs-fiber-laser/) explains the trade-offs, [what materials can a laser cut](https://laserengraversguide.com/posts/what-materials-can-a-laser-cut/) covers wood and beyond, and the [wattage explainer](https://laserengraversguide.com/posts/laser-engraver-wattage-explained/) shows why a “45W” CO2 tube and a 40 W diode aren’t comparable numbers.

## Don't guess. Calculate.

- [🎯 Laser Matcher](https://laserengraversguide.com/tools/laser-matcher/): which lasers fit your projects
- [🧪 Material Checker](https://laserengraversguide.com/tools/material-checker/): what each laser can cut
- [💰 Profit Calculator](https://laserengraversguide.com/tools/profit-calculator/): cost, price and payback
- [📊 Compare every laser](https://laserengraversguide.com/laser-engravers/): sortable spec table

## Frequently asked questions

### What is the best laser cutter for wood?
For most makers who can vent outdoors, the xTool P2S. Its 55 W CO2 tube is rated by xTool at 18 mm basswood in one pass, it has a 600 × 305 mm bed with passthrough for long boards, and cameras and autofocus make it easy to use. It costs about $2,919 on Amazon.

### Can a diode laser cut wood?
Yes. Blue diodes cut basswood, plywood, hardwood, MDF and cork. Power decides thickness: a 10 W diode cuts about 3 mm in a pass or two, while 20–40 W diodes go much thicker. Dense hardwoods cut slowly on a diode, and air assist makes a big difference.

### Is CO2 or diode better for cutting wood?
CO2 is faster, especially on thick stock, and also cuts clear acrylic. A 40 W diode such as the xTool S1 cuts thick wood in a smaller, Class 1 package without a glass tube or water cooling. If you mostly cut 3–6 mm plywood, either works.

### What wood should I avoid laser cutting?
Avoid anything with PVC or vinyl laminate, and be careful with MDF: it cuts well, but its resin binder makes heavy, strong-smelling smoke that needs good ventilation. Cheap construction plywood often has glue voids that leave uncut spots, so buy laser-grade sheets.

## Sources

- [The Gadgeteer: xTool P2S 55W Desktop CO2 Laser Cutter review](https://the-gadgeteer.com/2025/01/05/xtool-p2s-55w-desktop-co2-laser-cutter-review-a-laser-cutting-and-engraving-dream-machine) · checked 2026-10-30 — The reviewer found the P2S's wood cuts clean with very little to no charring, and called the machine outstanding.
- [Maker Hacks: xTool S1 review](https://www.makerhacks.com/xtool-s1-review) · checked 2026-10-30 — The S1 uses a touch probe to measure material height, supports curved-surface engraving, and offers rotary, air-assist, riser and conveyor accessories.
- [Tom's Hardware: xTool P3 review](https://www.tomshardware.com/maker-stem/xtool-p3-review) · checked 2026-10-30 — Tom's Hardware found the 80 W P3 fast and accurate at cutting wood and acrylic, and certified Class 1.
- [xTool: S1 laser cutter product page](https://www.xtool.com/products/xtool-s1-laser-cutter) · checked 2026-10-30 — S1 clearance is 42 mm without a riser and 125 mm with the Class 1 riser base.

## Get new guides by e-mail
One short e-mail when Laser Engravers Guide publishes a new guide. No spam, no sharing your address, and you can unsubscribe in one click.

 E-mail address

New posts only · Unsubscribe anytime · [Privacy](https://laserengraversguide.com/privacy/)

Our #1 pick
 Best for cutting wood: 55 W CO2, 18 mm basswood in one pass (maker claim), 600 × 305 mm bed, about $2,919 ![xTool P2S 55W Desktop CO2 Laser](https://laserengraversguide.com/_astro/xtool-p2s.Pf-kujUy_EYMdl.webp)

### [xTool P2S 55W Desktop CO2 Laser](https://laserengraversguide.com/laser-engravers/xtool-p2s/)
 8.7

- 55 W co2
- Enclosed
- 600 × 305 mm
Makers and small businesses who want to cut thick wood and every kind of acrylic, engrave glass, and still have camera-guided, autofocus convenience.
   $$$$ Premium Price tier: Premium base bundle on Amazon
[Check price on Amazon](https://www.amazon.com/dp/B0DDXQYH36?tag=laserengraversguide.com-20)[Read the full review](https://laserengraversguide.com/laser-engravers/xtool-p2s/)

[🎯 Not sure which fits? Match a laser to your materials, space and budget in 30 seconds.](https://laserengraversguide.com/tools/laser-matcher/)[🧪 Can it cut that? Check any material against diode, CO2 and fiber lasers.](https://laserengraversguide.com/tools/material-checker/)

## Keep reading
[Head-to-head
### xTool S1 40W vs xTool P2S 55W: Enclosed Diode or Desktop CO2?
xTool S1 40W vs P2S 55W: an enclosed Class 1 diode vs a desktop CO2. Clear acrylic, cutting, cameras, upkeep, safety, real prices and which one fits your space.
 Updated Oct 30, 2026](https://laserengraversguide.com/posts/xtool-s1-vs-xtool-p2s/)[Laser types
### Diode vs CO2 vs Fiber Laser: Which Type Do You Actually Need?
Diode vs CO2 vs fiber lasers explained: how wavelength decides what each cuts and marks, plus speed, upkeep, cost and safety, plus our picks of each type.
 Updated Oct 30, 2026](https://laserengraversguide.com/posts/diode-vs-co2-vs-fiber-laser/)[Materials
### What Materials Can a Laser Cut or Engrave? Diode vs. CO2 vs. Fiber
Which materials a blue diode, CO2, fiber or UV laser can cut or engrave: wood, acrylic, leather, glass, slate and metal, plus the plastics you must never laser.
 Updated Oct 30, 2026](https://laserengraversguide.com/posts/what-materials-can-a-laser-cut/)

 Best for cutting wood: 55 W CO2, 18 mm basswood in one pass (maker claim), 600 × 305 mm bed, about $2,919 xTool P2S $$$$ Premium Price tier: Premium
[Check price](https://www.amazon.com/dp/B0DDXQYH36?tag=laserengraversguide.com-20)